The conditions of software for Windows 7 and Mac OS X 10.6 (Snow Leopard)

2011/08/12

| Windows 7 |
Mac OS X 10.6 (Snow Leopard) |

The conditions of software for Windows 7are as follows:

*The following operating conditions are the results obtained by internal tests. Note that other problems may be occurred.
*The software other than those below does not support Windows 7.
*The operation in XP mode has not been checked.
* “Ver” on the following table shows the version of software supports Windows 7.

Test environment:: 32-bit: Windows 7 Ultimate(x86); 64-bit: Windows 7 Ultimate(x64)

Yes Functions normally.
Operable, but partially has problems.
No Cannot be used.

Product name	Ver	Operation		Status	Measures	When settled
Product name	Ver	32-bit	64-bit	Status	Measures	When settled
Mimaki Driver Ver3.0	3.0	Yes	Yes	Windows 2000/XP/Vista/7 have been supported. Integrated conventional USB1.1, USB2.0, and IEEE1394 driver.	Download	Completed
FineCut8 for Illustrator	8.0	Yes	Yes	It operates normally. * For the operation of Adobe Illustrator, please contact Adobe Systems Incorporated.		Completed
FineCut7 for Illustrator	7.6.2			Mimaki Driver dose not function normally when the version of it is older than 3.0. * For the operation of Adobe Illustrator, please contact Adobe Systems Incorporated.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	Completed
FineCut8 for CorelDRAW	8.0	Yes	Yes	It operates normally. * For the operation of CorelDRAW, please contact Corel Corporation.		Completed
FineCut7 for CorelDRAW	7.6.2			Mimaki Driver dose not function normally when the version of it is older than 3.0. * For the operation of CorelDRAW, please contact Corel Corporation.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	Completed
SimpleCut	1.10 1.20			Mimaki Driver dose not function normally when the version of it is older than 3.0.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	Completed
SimpleCut	1.3			Mimaki Driver does not function normally when the version of it is older than 3.0. The older version of Mimaki Driver was included in the CD which has following number at CD label. M800942-2 (How to check)	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	Completed
RasterLinkPro5 series	2.00	Yes	Yes	It operates normally.		Completed
Mimaki ProfileMasterII	2.01	Yes	Yes	It operates normally.		Completed
SimpleStudio	2.10	Yes	Yes	It operates normally.		Completed
RasterLinkPro4 series	-	No	No	RasterLinkPro4 Series does not work properly on Windows7.	Please use RasterLinkPro5 Ver2.00 or more.	No plan
RasterLink Pro III series	-	No	No	RasterLink Pro III series does not work properly on Windows7.	Please consider the purchase of RasterLinkPro5 series.	No plan
When using Windows 7 for RasterLinkPro5 client	2.00	Yes	Yes	It operates normally.		Completed
When using Windows 7 for RasterLinkPro4 client	1.24	Yes	No	[Network printer sharing] [1] Data can be output using the printer driver from 32-bit Windows 7. [2] It cannot be connected from 64-bit Windows 7. [Hot folder sharing] [1] Data can be output using the hot folder.	From 64-bit Windows client, output using the hot folder.	No plan
When using Windows 7 for RasterLink Pro III client	1.22		No	[Network printer sharing] [1] Data can be output using the printer driver from 32-bit Windows 7 to RasterLink Pro III installed on Windows Vista or XP. It cannot be connected to Windows2000. [2] It cannot be connected from 64-bit Windows 7. [Hot folder sharing] [1] Data can be output using the hot folder to RasterLink Pro III installed on Windows Vista or XP. It cannot be connected to Windows2000.	From 64-bit Windows client, output using the hot folder.	No plan
When using Windows 7 for RasterLink Pro II client	3.5		No	[Network printer sharing] [1] Data can be output using the printer driver from 32-bit Windows 7 to RasterLink Pro II installed on Windows XP. It cannot be connected to Windows2000. [2] It cannot be connected from 64-bit Windows 7. [Hot folder sharing] [1] Data can be output using the hot folder to RasterLink Pro II installed on Windows XP. It cannot be connected to Windows2000.	From 64-bit Windows client, output using the hot folder.	No plan
When using Windows 7 for RasterLink Pro client	-	No	No	[Web screen display] [1] MicrosoftVM cannot be used. [2] JRE1.4 cannot be used. Though the screen displays on IE8 with JRE6 installed, RasterLink Pro does not support IE8 and JRE6 formally. [Network printer sharing] [1] Job cannot be spooled normally. [2] AdobePS cannot be installed. [Hot folder sharing] [1] Data can be output using the hot folder to RasterLink Pro installed on WindowsXP. It cannot be connected to Windows2000. [Mistral TCP/IP Port] [2] It cannot be used.	From Windows 7 client, output using the hot folder.	No plan
When using Windows 7 for RasterLinkGP client	-	No	No	[Network printer sharing] [1] Job cannot be spooled normally. [2] AdobePS cannot be installed. [Hot folder sharing] [1] Data can be output using the hot folder to RasterLinkGP installed on Windows XP. It cannot be connected to Windows2000.	From Windows 7 client, output using the hot folder.	No plan
When using Windows 7 for RasterLinkUJ client	-	No	No	[Network printer sharing] [1] Job cannot be spooled normally. [2] AdobePS cannot be installed. [Hot folder sharing] [1] Data can be output with the hot folder to RasterLinkUJ installed on Windows XP. It cannot be connected to Windows2000.	From Windows 7 client, output using the hot folder.	No plan
USB1.1 Driver	-	No	No	It cannot be installed.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	No plan
USB2.0 Driver	-	No	No	It cannot be installed.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	No plan
IEEE1394 Driver	-	No	No	It cannot be installed.	Please use Mimaki Driver Ver.3.0 which corresponded to Windows 7. Download	No plan

The conditions of software for Mac OS X 10.6 (Snow Leopard) are as follows:

*The following operating conditions are the results obtained by internal tests. Note that other problems may be occurred.
* “Ver” on the following table shows the version of software supports Mac OS X 10.6.

Test environment:: Mac OS X 10.6 Build 10A432

Yes Functions normally.
Operable, but partially has problems.
No Cannot be used.

Product name	Ver	Operation	Status	Measures	When settled
FineCut8 for Illustrator	8.0	Yes	It operates normally. * For the operation of Adobe Illustrator, please contact Adobe Systems Incorporated.		Completed
FineCut7 for Illustrator	7.6.3	Yes	It operates normally. * For the operation of Adobe Illustrator, please contact Adobe Systems Incorporated.		Completed
When using OS10.6 for RasterLinkPro5 client	1.03		· SMB connection Data can be output using the printer driver or the hot folder. · AppleTalk connection It cannot be connected.	Even if using PC MACLAN, it cannot be connected with AppleTalk. Connect with SMB.	No plan
When using OS10.6 for RasterLinkPro4 client	1.24		· SMB connection Data can be output using the printer driver or the hot folder. · AppleTalk connection It cannot be connected.	Even if using PC MACLAN, it cannot be connected with AppleTalk. Connect with SMB.	No plan
When using OS10.6 for RasterLink Pro III client	1.22		[Network printer sharing] · SMB connection Data can be output using the printer driver to RasterLink Pro III installed on Windows Vista or XP. It cannot be connected to Windows2000. · AppleTalk connection It cannot be connected. [Hot folder sharing] · SMB connection Data can be output using the hot folder to RasterLink Pro III installed on Windows Vista or XP. It cannot be connected to Windows2000. · AppleTalk connection It cannot be connected.	· Even if using PC MACLAN, it cannot be connected. · Please consider the purchase of RasterLinkPro5 series.	No plan
When using OS10.6 for RasterLink Pro II client	-	No	[Network printer sharing] It cannot be connected. [Hot folder sharing] It cannot be connected.	· Even if using PC MACLAN, it cannot be connected. · Please consider the purchase of RasterLinkPro5 series.	No plan
When using OS10.6 for RasterLink Pro client	-	No	[Web screen display] Though the screen can be displayed on Safari, some problems may occur, such as missing of the part of the screen, or disabling of the cursor key. RasterLink Pro supports only Internet Explorer as a browser formally. [Network printer sharing] It cannot be connected. [Hot folder sharing] It cannot be connected.	· Even if using PC MACLAN, it cannot be connected. · Please consider the purchase of RasterLinkPro5SG.	No plan
When using OS10.6 for RasterLinkGP client	-	No	[Network printer sharing] It cannot be connected. [Hot folder sharing] It cannot be connected.	· Even if using PC MACLAN, it cannot be connected. · Please consider the purchase of RasterLinkPro5TA.	No plan
When using OS10.6 for RasterLinkUJ client	-	No	[Network printer sharing] It cannot be connected. [Hot folder sharing] It cannot be connected.	· Even if using PC MACLAN, it cannot be connected. · Please consider the purchase of RasterLinkPro5IP.	No plan

The conditions of software for Windows 7 and Mac OS X 10.6 (Snow Leopard)

The conditions of software for Windows 7are as follows:

[Network printer sharing]

[Hot folder sharing]

[Network printer sharing]

[Hot folder sharing]

[Network printer sharing]

[Hot folder sharing]

[Web screen display]

[Network printer sharing]

[Hot folder sharing]

[Mistral TCP/IP Port]

[Network printer sharing]

[Hot folder sharing]

[Network printer sharing]

[Hot folder sharing]

The conditions of software for Mac OS X 10.6 (Snow Leopard) are as follows:

· SMB connection

· AppleTalk connection

· SMB connection

· AppleTalk connection

[Network printer sharing]

· SMB connection

· AppleTalk connection

[Hot folder sharing]

· SMB connection

· AppleTalk connection

[Network printer sharing]

[Hot folder sharing]

[Web screen display]

[Network printer sharing]

[Hot folder sharing]

[Network printer sharing]

[Hot folder sharing]

[Network printer sharing]

[Hot folder sharing]