 |
JV5-320DS
|
| Print Head |
On-Demand Piezo Heads (Array of 4 staggered print heads)
|
| Maximum printing width |
3,250mm (Textile)
3,290mm (Paper)
|
| Printing resolution |
540, 720, 1,440 dpi |
Printing mode
(Scan x Feed)
|
720 x 540 dpi; Bi-/Uni-direction |
540 x 900 dpi; Bi-/Uni-direction
|
| 540 or 720 x 720 dpi; Bi-/Uni-direction |
| 540 or 720 x 1,080 dpi; Bi-/Uni-direction |
| 720 x1,440 dpi; Bi-/Uni-direction |
| 1,440 x 1,440 dpi; Bi-/Uni-direction |
| Ink |
Kind |
Dye-sublimation ink Sb52
|
| Supply |
Automatic change of double ink cartridges |
| Capacity |
6 color mode:440 cc cartridge x 2/color, 880 cc/color |
4 color mode: 440 cc cartridge x 4/color, 1,760 cc/color
|
|
Media
specification
|
Media |
Pre-treated polyester substrates,Transferpaper |
| Size |
Max. width: 3,300 mm (129.9")
Min. width: 297 mm (11.6")
|
| Thickness |
5.0mm or below |
| Roll weight |
130 kg (286.6 lbs) or below
|
| Printing surface |
Face out/ face in |
| Roll diameter |
Inside: 3inch / Outside: Less than φ250mm (9.8") |
| Media cutting |
Cutting in Y direction by hands |
| Media heater |
3 way intelligent heater (PRE/POST) |
| Media take-up device |
Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less |
| Nozzle checking unit (NCU) |
Laser system (Class 1 or below) |
| Print gap |
1.5 mm to 7 mm, step-less & user setting
(Automatic detection of media thickness) |
Distance accuracy
|
Absolute accuracy |
±0.3mm or ±0.3 % of designated distance, whichever is greater |
| Reproducibility |
±0.2mm or ±0.1 % of designated distance, whichever is greater
(with Media designated by us) |
| Interface |
USB2.0 |
| Power specification |
AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below |
| Power consumption |
7,200 VA or below |
| Operational environment |
Usable temperature: 20°C to 35°C , Humidity: 35 to 60%Rh
(No condensing) |
| Outer dimension |
(W)x(D)x(H) |
5,170 x 1,610 x 1,640 mm or below |
| Weight |
1,200 kg (2,646 lbs) or below |
