 |
|
| Intelligent heater to enhance color development and to fix the ink by automatically heating the media to its proper temperature.(included as standard) |
|
|
Large-sized heater & Drying fan |
|
|
 |
Equipped with a large-sized post-heater and drying fan, which promotes drying of the media printed at high speeds, thus enabling the winding. |
|
|
 |
User interface is easy to use, as the operating panel and heater lamp is placed in one place. |
|
 |
|
Head gap can be set step-less in 4 positions between 1.5 mm to 7 mm. |
|
|
The thickness of the media is automatically detected and the height of the head is automatically adjusted to get the designated head gap. Even when the thickness of the media is changed, printing can be made with a constant head gap. This enables the user to always obtain the best printing results. |
|
|
 |
|
| Control the odor of ink generated during printing. Equipped with exhaust fan and exhaust duct to quickly evacuate ink odors. |
 |
|
| The media is transported stably without being affected by the weight of the media roll. This reduces the banding caused by irregular feeding of the media which achieves high quality printing results. |
 |
|
|
Monitoring ink-discharging state from the printing head and ink clogging is quickly detected and cleaned, saving the waste of media and ink. |
|
|
USB2.0 interface enabling high speed data transmission. |
|
|
Automatic take-up device that enables continuous running without operator. |
|
