 |
JV4-130
|
JV4-160
|
JV4-180
|
| Print heads |
Method |
Piezo electric drop on demand 6 heads (3 by 2 staggered)
Nozzle configuration
|
High speed :360 nozzles per color
Combination :180 nozzles per color |
|
| Height adjustment |
1.2 mm to 10 mm from the platen |
| Maximum printing width |
1,371mm (53.9")
|
1,600mm (62.9")
|
1,870mm (73.6)
|
| Printing head mode |
Resolution |
360, 540, 720,1440 dpi (variable dot except 360, 540dpi) |
Printing mode
(Scan x feed) |
360 x 360dpi : 2 / 4 pass Bi / Uni direction
360 x 540dpi : 3 / 6 pass Bi / Uni direction
360 x 720dpi : 4 / 8 pass Bi / Uni direction
720 x 720dpi : 4 / 8 / 16 pass Bi / Uni direction
1440 x 720dpi : 8 / 8 / 16 pass Bi / Uni direction
1440 x1440dpi : 16 / 32 pass Bi / Uni direction
|
| Printing accuracy |
Distance accuracy |
Absolute : ±0.3 mm (0.0118") or ±0.3 % whichever is grater |
| Perpendicularity |
±0.5 mm (0.0196") / 1,000 mm (39.0") |
| Inks |
Ink type Color |
| 1. |
Aqueous pigmented inks 6 colors (black, cyan, magenta, yellow, light cyan, light magenta) or (black, cyan, magenta, yellow, orange, green)
|
| 2. |
Aqueous dye inks 6 colors (black, cyan, magenta, yellow, light cyan, light magenta)
|
| 3. |
Disperse inks 6 colors"
|
|
| Ink capacity |
Each color: 220 cc±5 cc x 2 cartridge or x 1 cartridge Usable amount 200 cc per one cartridge |
| Waste ink tank |
Bottle (1000cc) No ink sensor on the tank |
| Media |
Media size
(Maximum) |
1,381 mm (54.3")
|
1,620 mm (63.7")
|
1,910 mm (75.1")
|
Media size
(Minimum) |
210mm(8.2") |
| Thickness |
7.0mm(0.275"") or less" |
Media margin
(Roll) |
Right / Left : 5 mm (0.196") ±0.5 mm (0.0196"),
Front : 50 mm (1.968") ±2 mm (0.078"), Rear : 0 mm |
Media margin
(Sheet cut) |
Right / Left : 5 mm (0.196") ±0.5 mm,
Front : 85 mm (3.346") ±2 mm (0.078"),
Rear : 85 mm (3.346") + 2 mm (0.078") |
| Roll outside diameter |
Less than φ150 mm (5.90") |
| Roll weight |
Less than 20 kg |
| Roll inside diameter |
2 inch, 3 inch |
| Plotting surface |
Faces OUT |
| Media cutter |
| 1. |
Located in the head to cut toward Y axis
|
| 2. |
Cutting accuracy (gap towards X axis) Less than 0.5 mm (0.0196")
|
|
| Media feed |
Standard media take-up device
(clockwise or counter clockwise selectable) |
| Media(Form board) |
Thickness : 7.0 mm (0.275") or less,
Deflection : 1.0 mm (0.039") or less |
| Interface |
1. IEEE-1394
2. IEEE-1284 |
| Command |
MRL-2 (valuable dot version) Version 2.0
Mimaki original command based on ESC/P |
| Power |
AC100V - 240V +/- 10% (Automatic change) 50/60 Hz +/- 1 Hz |
| Power consumption |
Less than 400VA |
| Operational environments |
Acceptable temperature:5ºC~30ºC
Relative humidity:35~65%Rh (No condensation)
Temperature:18ºC~25ºC
Grade temperature:Less than ±10ºC/h
Dust:Office |
| Weight |
Less than 130kg
(286lbs) |
Less than 140kg
(308lbs) |
Less than 160kg
(352lbs) |
| Dimension (W) |
2,405 mm (94.69") |
2,740 mm (107.87") |
3,025mm (119.1") |
| Dimension (D) |
730 mm (28.74") |
| Dimension (H) |
1,220 mm (48.03") |
