|
|
 |
 |
|
|
JV33-130
|
JV33-160
|
JV33-260
|
| Head |
On-demand Piezo head (180nozzles x 8 lines) x1 head
|
| Maximum print width |
1,361mm (53.5") |
1,610mm (63.3") |
2,632mm (103.6") |
| Printing resolution |
540,720,1,440dpi |
Printing mode
(scan x feed) |
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi |
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi,
720 x 1,440dpi |
| 1,440 x 1,440dpi |
| Ink |
Kind |
Exclusive Solvent ink: ES3 ink, SS21 ink
|
| Exclusive aqueous pigment ink |
| Exclusive dye sublimation ink |
| Capacity |
4-color mode:440cc cartridge x 2/color, 880cc/color |
| 6-color mode:440cc cartridge x 1/color, 440cc/color |
| Media |
Size |
1,371mm (53.9") |
1,620mm (63.9") |
2,642mm (104.0") |
| Roll weight |
Less than 25kg (55.1lbs.) |
Less than 100kg (220lbs.) |
| Print surface |
Face out |
| Roll inside diameter |
2 inch or 3 inch |
| Media cutting |
Cutting on Y direction by cutter at the head |
| Media heater |
Triple stage intelligent heater (Pre/Print/Post) |
| Media Take-up device |
Roll take-up device (standard), inside/outside selectable |
| Interface |
USB2.0 |
| Applicable standards |
VCCI Class A,FCC Class A, UL 60950-1 |
CE Marking (EMC directive, Low voltage directive),
CB report |
| Power |
AC100~120V±10%, AC220~240V±10%,
50/60Hz±1Hz |
| Power consumption |
Less than 1,440 VA |
Less than 1,440 VA x 2 plugs |
| Operation environments |
Usable temperature:20°C~35°C (64~95°F),
Humidity:35~65%RH (No condensation) |
| Dimensions (W x D x H) |
2,289 x 739 x 1,424mm
(90.1" x 29.1" x 56.1") |
2,538 x 739 x 1,424mm
(99.9" x 29.1" x 56.1") |
3,650 x 1,302 x 1,424mm
( 143.7" x 51.3" x 56.1") |
| Weight |
145kg (320lbs.) |
160kg (353lbs.) |
450kg (992lbs.) |
|
|
Some of the samples in this catalogue are artificial renderings. |
|
|
Specifications, design and dimensions stated in this catalogue may be subject to change without notice (for technical improvements, etc). |
|
|
The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations. |
|
|
Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences. |
|
|
