|
|
 |
 |
 |
|
|
|
|
|
|
|
CG-100SRII
|
CG-130SRII |
| Acceptable sheet width |
90-1,250mm (3.54"-49.2")
|
90-1,550mm (3.54"-61.0") |
| Effective cutting area *1 |
1,070mm (42.1")
|
1,370mm (53.9") |
| Maximum cutting speed |
85 cm/s (33.5"/s) (at the angle of 45) |
| Adjustable speed range *2 |
1-10cm/s:1cm step adjustment (0.39"-3.94" /s:0.39" step adjustment) |
| 10-60cm/s 5cm step adjustment (3.94"-23.6" step adjustment) |
| Repeatability |
0.2mm / 2m (Excluding shrinkage / expansion caused by film temperature) |
|
Effective Repeatabilit
|
1,050mm x 2m
|
1,350mm x 2m |
| Pen pressure |
400g
|
| Range of down pressure |
Cutter |
10-20g (2g step), 20-100g (5g step), 100-400g (10g step) |
| Pen |
10-20g (2g step), 20-100g (5g step), 100-150g (10g step) |
| Acceptable sheet *3 |
Vinyl up to 0.25mm (0.01") thickness,
Fluorescent type vinyl, Reflective sheet |
| Applicable tools *4 |
Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool |
| Type of command |
MGL-IIc / Ic1 |
| Interface |
USB,RS-232C |
| Receiver buffer size |
30MB Standard |
| Operational environment |
5-35°C (41-95 °F), 35-75 %(Rh) Non-condensation |
| Power requirement |
AC100 V-240V, 120VA or less |
| Dimensions (WxDxH) |
1,435mm (56.5")x580mm (22.8")x1,125mm (44.3") |
1,735mm (68.3")x580mm (22.8")x1,125mm (44.3") |
| Weight (with stands) |
38kg (83.8lbs) |
44kg (97.0lbs) |
|
|
All trademarks or registered trademarks are the property of the respective owners.
Specifications are subject to change without notice.
|
|
|
| *1: |
Maximum sheet feeding length for differs depending on the software. |
|
|
| *2: |
Restricted sheet width. |
|
|
| *3: |
Provided that the blade specific for fluorescent type vinyl (SPB-0007)
and the blade specific for reflective sheet (SPB-0006) are used. |
|
|
| *4: |
Thegoods on the market are φ8-φ9.
Noguarantee for with accuracy and image quality. |
|
|
