|
CG-60SR
|
| Acceptable sheet width |
90-740mm (roll sheet:90-640mm), 3.6" - 29.1" (3.6"- 25.2")
|
| Effective cut area*1 |
Normal : 586mm x 51m (23.1" - 167')
Expand : 606mm x 51m (23.8" - 167')
|
| Maximum speed |
85cm/s (33.4"/s) pen-up speed at 45° |
| Adjustable speed range |
1-10cm/s: 1cm step (0.39"-3.94"/s: 0.39" step)
10-60cm/s: 5cm step (3.94"-2.36"/s: 2.0" step) |
| Repeatability |
±0.2mm (excluding shrinkage/expansion caused by the film temperature) |
|
Guaranteed cutting range
|
586mm x 2m (23.0" - 78.7")
|
| Maximum cutting force |
400g
|
| Range of down pressure |
Cutter |
10~20g(2g step), 20~100g(5g step), 100~400g(10g step) |
| Pen |
10~20g(2g step), 20~100g(5g step),100~150g(10g step) |
| Acceptable sheet width |
Marking film up to 0.25mm (0.001")
thickness: Vinyl, Fluorescent type vinyl, Reflective sheet *2 |
| Applicable tools*3 |
Cutter, Water based ball-point pen, Oil based ball-point pen |
| Command |
MGL-IIc |
| Interface |
USB |
| Receiver buffer size |
30 MB (20MB when in sorting) |
| Operational conditions |
5~35°C(41~95°F), 35~75%Rh, No-condensation |
| Power requirement |
AC100V~240V Less than 100VA |
| Dimensions (WxDxH) |
960 x 430 x 335mm (37.8" x 16.9" x 13.2") |
| Weight |
18kg (39.7lbs.) |
