|
|
 |
 |

|
|
|
JF-1631 |
JF-1610 |
| Head |
Piezo-electric drop on-demand |
Resolution
|
600 x 600dpi, 1200 x 1200dpi |
| Ink |
Exclusive UV curable ink (7 colors: Yellow. Magenta, Cyan .Black, Light magenta,. Light cyan, White)+Clear |
Ink volume
|
400cc /cartridge
4-color print mode: 440cc x 2 cartridges /color,
8-color mode: 440cc x 1 cartridge /color |
| Effective printing area |
1,602 x 3,100mm
(63.0" x 122.0") |
1,602 x 1,016mm
(63.0" x 40.0") |
| Perpendicularity |
±0.5mm/500mm |
| Distance accuracy |
±0.5% |
| Media |
size |
1,694 x 3,194mm
(66.6" x 125.7") |
1,694 x 1,080mm
(66.6" x 42.5") |
| Thickness |
Less than 50mm (1.96") |
| Weight |
Less than 200kg (441lbs) |
Less than 70kg (155lbs) |
| Media set device |
Air suction by vacuum unit |
| UV device |
Equipped with 2 sets of UV lamp |
| Interface |
USB2.0 |
| Applicable standard |
VCCI class A, CE Marking, CB Report, UL, RoHS Directive |
| Power specifications |
AC200~240V±10%, 50/60Hz±1Hz, less than 30A |
| Power consumption |
Less than 6.0KVA |
Operational
environment |
Temperature
|
15°C~30°C (59°F~86°F) |
Humidity
|
35%~65% Rh |
Accuracy guarantee
temperature |
18°C~25°C (64°F~77°F) |
| Temperature gradient |
Less than ±10°C/h (18°F) |
| Dust |
Equivalent to normal office level |
| Weight |
Less than 1,150kg (2,533lbs.) |
Less than 1,050kg (2,313lbs.) |
Dimensions
(W x D x H) |
3,380 x 4,230 x 1,350mm
(133.1" x 166.6" x 53.2") |
3,380 x 2,005 x 1,350mm
(133.2" x 79.0" x 53.2") |
[Matters to note regarding media and ink]
Ink performance of materials
| · |
Post-printing ink property performance (adhesion, weather durability, etc.) varies according to the material. |
| · |
If printing materials other than those described are to be used, please test the materials first. |
| · |
Adhesion performance differs according to the material. Thus, there are cases in which optimization of ink and anchor coat/overcoat is necessary. |
UV lamp
| · |
The lamp is guaranteed by 500 hours. |
| · |
The UV lamp illumination level goes down over the time. After 1,000 hours using, the level goes down approximately 30%. |
|
|
|
All trademarks or registered trademarks are the property of their respective owners. |
|
|
Specifications are subject to change without notice. |
|
|
Some of the screens and printing samples in this catalog are artificial renderings. |
|
|
Inkjet printers print using extremely fine dots, so colors may very slightly differ following replacement of the printing heads. Also note that if using multiple printer units, colors may slightly differ among the units due to slight individual differences among the units. |
 |
Inks and substrates: |
|
|
| · |
Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing. |
| · |
Some substrates require primer before printing. Please test materials beforehand or ask your sales representative. |
 |
Safety notice: |
|
|
You are dealing with UV light sources that may harm your health.
Please follow below guidelines strictly: |
|
| · |
Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source. |
| · |
Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened. |
| · |
In addition, please read the instructions and guidelines of the manual carefully and follow those. |
|
 |
|