|
The high-performance reciprocal head enables to expand a cutting area |
|
|
|
Equipped with an air-driven reciprocal head that enables to move the cutter up and down at high-speed. It enables to perform cutting on the materials which have been uncuttable, such as thicker carbon, foamed materials, or laminated macromolecule materials: The available cutting area expanded. |
|
Cuttable thickness and the blade durability was improved with the up and down movement for 6,500 times per a minute. |
|
|
|
It enables high-precision cutting by performing up and down movement for 6,500 times a minute at high speed: A drum-shaped foam can be cutout to 60mm size with a high degree of accuracy. Various type of carbons available to cut at will, and the blades durability was improved dramatically: It achieved cheaper running cost with high-precision cutting performance. |
|
|
|
|
Air suction divided in quarters firmly fixes the material. |
|
|
|
Fix a material with air suction which is delicate for the material (with high-powered air suction of three-phase 200V, 2.2kw.) Additionally, the available range was divided in quarters: It enables to set quickly the various materials (from a whole cloth to discard materials) with accuracy. |
|
Formulate thoroughgoing safety measures in consideration of a reciprocal head. |
|
|
|
Safety for users is thoroughgoing measured in consideration of up and down movements of a cutter. |
|
 |
Place a safety barrier to provide a safety work operation in the X direction. |
|
Equipped with an optical sensor near the Y origin. In case human body or an obstruction enters in the manufacturing surface, the sensor operates an emergency stop. |
|
Equipped with an optical sensor at the front side of the Y-bar head. In case any of obstructions exist around the head, the sensor operates an emergency stop. |
|
Arranged the operation panel position to prevent an operator from replacing tools from other sides besides the optical sensor side. |
|
Set a switch on a head cover. Tool replacement is safely available as turning off the solenoid value. |
|
|
Tangential cutter is utilized as standard |
|
|
|
Tangential cutter is utilized as standard besides the reciprocal head. It applies to various materials, such as rubber, or joint sheet. |
|
|
| Appropriate materials for T-head |
|
| · |
Formed materials
| · |
Polyethylene foam |
|
( 60mm, depending on the formed magnification) |
| · |
Rubber sponge ( 60mm, depending on the formed magnification) |
| · |
Silicon sponge ( 60mm, depending on the formed magnification) |
| · |
Urethane foam ( 60mm, depending on the formed magnification) |
|
| · |
Joint sheet (0.4-3.0mm) |
| · |
Fluorocarbon resin (1.0-3.0mm) |
| · |
Soft polyvinyl (0.5-7.0mm) |
| · |
Rigid polyvinyl (0.5-1.0mm) |
| · |
Resin conveyor belt (Less than 5.0mm) |
|
| Appropriate materials for D-head |
|
| · |
Formed materials |
|
|
| · |
Cardboard (Marking gauges)
| · |
Micro flute ( G - E flute) |
| · |
B flute - AB flute |
| · |
Tri-wall (AA flute / AAA flute) |
|
| · |
Plastic case |
| · |
Polyvinyl for a clear package |
|
| Appropriate materials for F-head |
|
| · |
Formed materials |
|
|
| · |
Commercial rubber plate
| · |
Nytrill rubber (0.5-7.0mm) |
| · |
Silicon rubber (0.5-7.0mm) |
| · |
Fluorosis rubber (0.5-7.0mm) |
| · |
Polyurethane rubber (0.5-3.0mm) |
| · |
鼎loth-inserted rubber (0.5-5.0mm) |
|
| · |
Joint sheet (0.4-3.0mm) |
| · |
Fluorocarbon resin (1.0-3.0mm) |
| · |
Soft polyvinyl (0.5-7.0mm) |
| · |
Rigid polyvinyl (0.5-1.0mm) |
|
| *Cutting condition may differ depending on the material or the thickness. Ask for details. |
|
 |
|
T-head
A-station: Swivel blade / Pen (20-200g)
B-station: Tangential cutter (300-1,500g)
C-station: Reciprocal cutter (1,000-5,000g)
|
|
|
|
D-head
A-station: Swivel blade / Pen (20-200g)
B-station: Marking gauge tool (1,000-10,000g)
C-station: Reciprocal cutter (1,000-5,000g) |
|
F-head
A-station: Swivel blade / Pen (20-200g)
B-station: High-pressure tangential cutter (1,000-5,000g)
C-station: Reciprocal cutter (1,000-5,000g) |
|
