|
|
 |
 |
|
|
CF3-1631 |
CF3-1610 |
| Effective cut area |
1,600 x 3,100mm
(63" x 122") |
1,600 x 1,000mm
(63" x 39.3") |
| Head drive method |
X.Y,Z.θ DC servo, special timing belt |
| Maximum speed |
50cm (19.6'')/s |
| Maximum acceleration |
0.5G |
| Static accuracy |
Repeatability |
±0.15mm |
| Distance |
±0.1mm,or ±0.1% whichever is greater |
| Origin repeatability |
±0.15mm |
| Maximum cut depth |
Router : 50mm (1.96"), Tangential cutter : 10mm (0.39"),
Reciprocating cutter : 20mm (0.78") |
| Maximum media thickness |
Router : 50mm (1.96"), Tangential cutter : 30mm (1.18"),
Reciprocating cutter : 20mm (0.78") |
| Material clamp |
Vacuum system with blower |
| Command |
MGL-II c3 (MGL-IIc) |
| Interface |
USB, RS-232C |
| Main unit power supply |
200V~240V, Single phase 50/60Hz Less than 6A |
| Dust collector power supply |
AC100V-120V, Single phase 50/60Hz, Less than 15A
AC200V-240V, Single phase 50/60Hz, Less than 10A |
| Blower power supply |
AC200V-240V, Single phase 50/60Hz,
Less than 30A per unit |
| Dimensions (WxDxH) |
2,250 x 4,120 x 1,320mm
(88.6" x 162.2" x 52.0") |
2,250 x 1,860 x 1,320mm
(88.6" x 73.3" x 52.0") |
|
|
Some of the sample images in this catalogue are artificial renderings. |
|
|
All specifications and designs displayed in this catalogue are subject to change without prior notice. |
|
|
Company names and product names written in this catalogue are trademarks or registered trademarks of their respective owners. |
|
