| Model |
NC-5
|
X-Y
Axes |
Working surface |
483mm x 305mm (19" x 12") *1
|
| Maximum Material Size |
520mm x Unlimited (20.5" x Unlimited) |
| Speed |
Modeling |
0.5-80mm / sec (0.02"-3.1" / sec)
|
| Moving |
0.5-80mm / sec (0.02"-3.1" / sec)
|
| Acceleration |
0.3G
|
| Mechanical Resolution |
0.5μm
|
Z
Axis |
Z stroke |
110mm (4.3")
|
| Maximum Material Height |
130mm (5.1")
|
| Speed |
Modeling |
0.5-80mm / sec (0.02"-3.1" / sec) |
| Moving |
0.5-80mm / sec (0.02"-3.1" / sec) |
| Mechanical Resolution |
0.5μm
|
| Command |
MGL-IIC3, G *2 |
| Spindle |
Maximum Rotation |
15000rpm |
| Adjustable step |
Stepless adjustment 2,000-15,000 rpm |
| Positioning |
JOG Key or JOG Dia |
| Maximum Material Weight |
10kg |
| Method of setting Endmill |
Collet Chuck |
| Programmable Steps |
25μm or 10μm (MGL-IIC3), 1μm (G) |
| Maximum Shank Diameter of Endmill |
10mm (0.4") |
| Receiver buffer size |
1MB |
| Interface |
RS-232C |
| Table flatness accuracy |
0.2mm |
| Distance accuracy |
±0.15mm or ±0.05% of moving distance |
| Perpendicularity |
±0.3mm / 300mm |
| Repeatability |
0.05mm |
| Origin repetition accuracy |
±0.1mm |
| Power consumption |
1,400VA or less |
| Power requirement |
AC 100-120 / 220-240V 50 / 60Hz (Changed by Tap) |
| Operation enviorment |
5-40ºC 30-75% (Rh) No Condensation |
| Dimensions (W x D x H) |
725mm x 755mm x 660mm (Body) |
| 285mm x 505mm x 162mm (Controller) |
| Weight |
70kg (Body) |
| 25kg (Controller) |
